Takex PB100-IN-HF Quad Photo-electric beam - elitesol.in - takex.com

Takex PB100-IN-HF Quad Photo-electric beam
[0470008]

The TAKEX intelligent Quad photoelectric beam is especially designed for outdoor protection. Unique Quad beams are synchronised to work together to reinforce the range and stability in severe weather conditions. The PB-IN-HF series beams are equipped with many features which provide a wide choice of field selectable options. These options result in considerable flexibility for a variety of application requirements.

• 4 SYNCHRONISED HIGH POWER INFRARED (Patented)
  • 4 beams are AND-gated, which helps to prevent false alarms from falling leaves and small animals.
  • The active infrared transmission is exceptionally strong with a maximum arrival distance ten times greater than the specified protection distance.
  • External light compensation circuit provides excellent tolerance against sunlight, automobile headlights, fluorescent light or mercury light.
• FOUR FREQUENCIES SELECTIONS
  • 4 separate frequency choices avoid cross-talk in stacked or long linear installations.
• BEAM TRANSMISSION STRENGTH SELECTION
  • 2 levels of beam transmission strength can be set to suit the protection distance.
• AUTO-GAIN LOCK
  • Optimal sensitivity gain is automatically set at any coverage distance up to the maximum protection distance. Auto-Gain lock is easily confirmed by sound check.
• EASY BEAM ALIGNMENT
  • Audible signal for alignment (Utility model). An alignment tone enables quick set-up of the beams. The tone becomes maximum at peak of beam level.
  • Sensitivity attenuation LED lights when beam level is attenuated, which shows low sensitivity.
  • Monitor jack output.
• PROGRAMMED AGC
  • Sensitivity is automatically increased in bad weather to contend with fog, heavy rain, frost or snow.
• ALARM MEMORY
  • Alarm memory LED located on receiver can be automatically reset (5 mins after alarm, if flickers for 55 mins, then automatically resets) or can be manually controlled.
• ENVIRONMENTAL MODULE BUILT-IN Environmental trouble signal is sent when beam reception level is reduced below an acceptable level.
  • Wide adjustment (horizontally ±90°, vertically ±10°).
  • Tamper output.
  • Polycarbonate cover excellent at anti-shock.
  • Optional accessories.

Intelligent Quad Series

PB-IN-50HF Outdoor 150ft (50m)
PB-IN-100HF Outdoor 300ft (100m)
PB-IN-200HF Outdoor 600ft (200m)

Intelli-Flex and OmniTrax detection sensors - elitesol.in - sourcesecurity.com

Senstar is pleased to share two major government approvals of their industry leading perimeter intrusion detection sensors; Senstar’s Intelli-Flex with the United Kingdom’s Centre for Protection of National Infrastructure (CPNI) and OmniTrax with the United States Air Force.
Senstar’s product Intelli-Flex, fence mounted perimeter intrusion detection sensor, has met the United Kingdom’s CPNI grading and will again be included in the Catalogue of Security Equipment (CSE). Intelli-Flex was given approval by CSE under the previous name SEAP, this announcement is notice that CSE has reaffirmed approval, and Senstar is now eligible to announce approval under the new trademark.
By way of this approval, Intelli-Flex is “approved for UK Government Use, for details contact CPNI.”
“Senstar has a major focus on research and development, bringing new products to market regularly. This approval shows that the quality and effectiveness of Senstar’s products continue to meet the demands of the evolving security landscape,” said Mark Novak, Managing Director of Senstar Ltd.
CPNI is tasked with managing the protection of the UK's national infrastructure, which is defined by the Government as: “those facilities, systems, sites and networks necessary for the functioning of the country and the delivery of the essential services upon which daily life in the UK depends”.
Senstar has recently been given similar permission to announce positive results of product testing done by the United States Air Force.
Senstar’s product OmniTrax, covert buried cable intrusion detection sensor, has successfully passed both warm weather and cold weather testing by the US Air Force. Qualified organisations can obtain details of the testing and the results by contacting Electronic Systems Center, 642nd Electronic Systems Squadron (ELSS), Hanscom Air Force Base, MA, 01731, USA.
Senstar recognises the importance and validity of the testing done international government entities, such as CPNI and the Air Force and will strive to develop products with the desire to receive similar approvals and continue to protect assets worldwide.

optex burgular alarm systems - elitesol.in

Optex is a leading manufacturer of high technology security products. Our wide range of indoor and outdoor motion detectors, photoelectric detectors, control systems for burglary and fire alarm applications, and closed circuit television equipment. Quality manufacturer of Sensor Technology for the security automatic door, Industrial and Environmental Markets, family of Optex.

HX -80N-SP/ HX-80NAM-SP / HX-80NRAM-SP HX-80series offers high detection performance.  The most important element in reliable outdoor detector is accuracy to distinguish a human  from a small animal. Mounting height 2.5m - 3m Dual signal processing circuit – Summer night compensation logic – Advanced temperature compensationlogic Flexible detection area setting Intelligent AND logic with unique  pyro-element Vegetation sway analysis logic Double conductive shielding
	HX-40AM-SP/ HX-40DAM-SP / HX-40RAM-SP Micro-wave Intelligent Quantification logic Micro-wave range selector Active IR digital anti-masking function Mouting Height 2.5-3m Intelligent AND detection logic Dual signal processing circuit – Summer night compensation logic – Advanced temperature compensation logic Vegetation sway analysis logic Double conductive shielding Ideal detection area setting
AX-100TFR-SP/ AX-200TFR-SP Long battery life AX-100TFR: approx. 5 years AX-200TFR: approx. 3 years Battery life of AX-200TFR receiver is approx. 5years Easy battery replacement Triple tamper functions Low battery output and LED indication Intermittent output function Compatible with numerous wireless transmitters Battery saving timer function for wireless transmitters
	AX – 350/650TF Photoelectric Detector, Dual Alignment with Adjustable Beam, Height 15.7 In., Width 3.9 In., Depth 4.1 In., Black, Outdoor Detection Range 350 Ft, Indoor Detection Range 700 Ft Beam Blocking Ratio 99  Wall/Pole Mounting Lightning Protection Up to 14kV, Input Power 10.5 to 28V DC Current Consumption 60mA Max, Alarm Output Form C - 28VDC, .2A Max IP Rating IP 54 Operating Temp. -13 F to 131 F Includes Pole Mount Brackets Beam Blocking Ratio : 99 Current Consumption : 60mA Max Alarm Output : Form C - 28VDC, .2A Max Includes : Pole Mount Brackets   any quiries pls contact:cmdelitesol@gmail.com

vandal proof access contol system - www.elitesol.in - sebury.com.cn

contact :cmdelitesol@gmail.com

explosion - proof photoelectric beam sensor - PB-400 ex outoor - www.elitesol.in - takex.com

EXPLOSION-PROOF PHOTOELECTRIC BEAM SENSOR
PB-400EX Outdoor 400m

Detection system	Near infrared (through type)
Explosion-proof Construction	Intrinsically safe explosion proofing + ressure resistant explosion proof construction
Applicable Locations	Class 1 and 2 hazardous locations
Applicable Gases	2G4 (Explosion class: 2) (Ignition class: G4)
Labor Ministry Approval No.	Transmitter: No.T62011 Receiver: No.T62010
Alarm output	Dry contact relay output: N/C Reset time: Detection time +deray time (approx 1 sec) 220V (AC/DC) 0.5A or 10VA Max
Supply voltage	100V AC 50/60Hz or 200V AC 50/60Hz
Power consumption	5.5VA
Ambient temperature	−10C to +40C
External dimensions	W198mm × H258mm × D350mm
Weight	20,000g to 25,000g		contact:cmdelitesol@gmail.com, www.elitesol.in

photoelectric beam sensor - www.elitesol.in - takex.com

contact: cmdelitesol@gmail.com, 09000888922